Rain 10 Computer Control

The Briggs Program Rain 10 Computer Control ensures an even application rate by providing precise control of the retraction speed during the run, regardless of changes in ground conditions, drum diameter and pressure.

It also gives automatic shut down of the machine if the speed is not maintained to the correct level, if the pressure drops too low, or if the machine has finished the irrigation cycle.

The computer is fitted and programmed completely by us using only magnetic sensors rather than solenoid valves and micro switches to ensure long term reliability.

The main features are listed below.

• Precise speed control throughout the run resulting in extremely even application rate.
• Real time clock and time for the run to finish shown on display screen.
• Delayed start or stop facility.
• Up to 4 speed settings in one run.
• Total hours worked shown in the display.
• Set speed and actual speed shown in the display.
• Solar panel to keep the battery charged for the whole season.
• Battery voltage shown in the display.
• Length of pipe laid down shown in the display.
• Start on a built in timer facility.
• Automatic shutdown if actual speed is less than 70% of set speed.
• Adjustable valve opening and closing times.
• High or low pressure shut down facility.
• Facility to work with Briggs Hosereel Phone Link.